• 9
  • 9
  • 9
  • 9

9" 6 Spindle Super Duty Moulder

SM-623L

Price/ea
$72,990.00
Back

Features:

  • Feed speeds ranging from 20' ~ 98' per minute are a standard feature, faster feed speeds up to 120" per minute are available.
  • The full safety enclosure cover as chips guard and helps to reduce noises.
  • Table surface is hard-chrome plated for maximum wear resistance.
  • All manually adjusted turning parts are housed in dry hearings for oil-free lubrication. One-piece, cast iron machine frame and table is especially normalization heat treated for maximum stability and rigidity.
  • The smooth initial feeding of the stock is achieved by the independently powered infeed rollers.
  • All spindles are precision constructed and especially heat treated to provide maximum cutting stability and permanent accuracy.
  • Standard spindle speed is 8,000 RPM. Higher spindle speeds are available upon request.
  • Fence adjusted is quickly accomplished by a quick-setting lever.
  • The three independent section, pneumatic pressure for the infeed rollers, in-process rollers and outfeed rollers can be set with individual pressure allowing for consistent feeding results and outstanding effect.
  • The entire motion controls of the machine are centralized on the control panel for convenient operations.
  • All control levers for the spindles are located at the front of the machine for convenient adjustment.
  • Each spindle is provided with a mechanical digital read out, that gives accurate adjustment.
  • The pressure roller for short stock can be raised fast, providing maximum convenience while cutter changing or setup.
  • The device permits the feeding of short stocks with a minimum length of 8".
  • Vertical spindle adjustment up to 80 mm, it allows to fit several tools on the vertical spindle, eliminating troublesome cutter change.
  • Separate adjustment of vertical spindle and insert table, permits the table to be positioned extremely close to the cutter head for added cutting stability.
  • The front pressure plate features draw-back performance which fully avoids damage on cutters caused by an over-height workpiece.
  • The rear pressure plate provides extremely uniform molding pressure for outstanding parallelism accuracy of machining.
  • An individual motor drives each spindle and is separately mounted to eliminate spindle chattering during high speed running.
  • The roller in the infeed table is powered, providing a smooth feeding effect for the tough stock.
  • The spindles are lubricated by the centralized lubrication system for convenience.

SM-AOFEED

AUTO FEED HOPPER, MAGAZINE $8,900.00

DC-AUTO

AUTO DIGITAL THICKNESS CONTROL $1,990.00

SM-KFST

KNIFE CALIBRATE SETUP STAND $1,790.00

Specification:

SPECIFICATIONS SM-236C SM-237U SM-523L SM-623L SM-723L
Max. (Min.) Working Width 9" (3/4") 9" (3/4") 9" (3/4") 9" (3/4") 9" (3/4")
Max. (Min.) Working Thickness 4-3/4" (5/16") 4-3/4" (5/16") 5" (1/4") 5" (1/4") 5" (1/4")
Min. Working Length 9½" 9½" 8" 8" 8"
1st Spindle Horsepower 10 HP 10 HP 10 HP 10 HP 10 HP
2nd, 3rd Spindle Horsepower 10, 10 HP 10, 10 HP 10, 10 HP 10, 10 HP 10, 10 HP
4th, 5th, 6th Spindle Horsepower 15, 15, 15 HP 15, 15, 15 HP 20, 15, ~ HP 20, 15, 20 HP 20, 15, 15 HP
7th / Universal Spindle (HP) ~ 5.5 HP ~ ~ 20 HP
Feed Motor 7½ HP 7½ HP 7½ HP 7½ HP 10 HP
Elevation 1½ HP 1½ HP 1½ HP 1½ HP 2 HP
Spindle Diameter 40 MM 40 MM 40 MM 40 MM 40 MM
Cutter Speeds (RPM) 6500 6500 7200 7200 7200
Variable Feed Speeds (FPM) 16 ~ 82 16 ~ 66 17 ~ 66 26 ~ 119 27 ~ 119
Cutterhead Diameter
1st Bottom Head 4" ~ 5" 4" ~ 5" 4" ~ 6" 4" ~ 6" 4" ~ 6"
2nd ,3rd Vertical Head 5" ~ 6-1/4" 5" ~ 6-1/4" 5" ~ 6-1/4" 5" ~ 6-1/4" 5" ~ 6-1/4"
Top Head 5" ~ 7" 5" ~ 7" 5" ~ 7-3/4" 5" ~ 7-3/4" 5" ~ 7-3/4"
Last Bottom Head 5" ~ 7" 5" ~ 7" 4" ~ 10" 4" ~ 10" 4" ~ 10"
Pneumatic Air 90 PSI (CFM)  5 5 5 5 5
Dust Outlet Diameter 5" x 6 5" x 7 5" x 5 5" x 6 5" x 7
N.W. (LBS) 9800 10200 9700 11220 12900
G.W. (LBS) 10700 11060 10500 12300 13800

Related Products